Bushes are used as an additional component part of either Shear Banded Couplings or Lateral Connection Saddles. The purpose of a bush is to increase the outside diameter of a pipe to be connected if the pipe is too small for the coupling being used or the saddle being used.

• Bushes are used when the outside diameters of the pipes to be connected are significantly different

• Can be manufactured to suit specific site and application requirements

• Provide a high-performance seal on low-pressure pipes

• Versatility in application enables the bush to be used when an increase in the pipe outside diameter is needed

• Manufactured to meet the WIS standard

• Conform to BS EN 681-1

BC08/105 BUSH, 8 MM THICK EPDM, TO SUIT 105 MM

BC08/115 BUSH, 8 MM THICK EPDM, TO SUIT 115 MM

BC08/125 BUSH, 8 MM THICK EPDM, TO SUIT 125 MM

BC08/132 BUSH, 8 MM THICK EPDM, TO SUIT 132 MM

BC08/160 BUSH, 8 MM THICK EPDM, TO SUIT 160 MM

BC08/166 BUSH, 8 MM THICK EPDM, TO SUIT 166 MM

BC08/170 BUSH, 8 MM THICK EPDM, TO SUIT 170 MM

BC08/180 BUSH, 8 MM THICK EPDM, TO SUIT 180 MM

BC08/187 BUSH, 8 MM THICK EPDM, TO SUIT 177-187MM

BC08/192 BUSH, 8 MM THICK EPDM, TO SUIT 192 MM

BC08/200 BUSH, 8 MM THICK EPDM, TO SUIT 200 MM

BC08/250 BUSH, 8 MM THICK EPDM, TO SUIT 250 MM

BC08/265 BUSH, 8 MM THICK EPDM, TO SUIT 265 MM

BC08/315 BUSH, 8 MM THICK EPDM, TO SUIT 315 MM

BC08/345 BUSH, 8 MM THICK EPDM, TO SUIT 345 MM

BC08/357 BUSH, 8 MM THICK EPDM, TO SUIT 357 MM

BC08/400 BUSH, 8 MM THICK EPDM, TO SUIT 400-499MM

BC08/428 BUSH, 8 MM THICK EPDM, TO SUIT 428 MM

BC12/100 BUSH, 12 MM THICK EPDM, TO SUIT 100 MM

BC12/125 BUSH, 12 MM THICK EPDM, TO SUIT 125 MM

BC15/115 BUSH, 15 MM THICK EPDM, TO SUIT 115 MM

BC16/164 BUSH, 16 MM THICK EPDM, TO SUIT 164 MM

BC16/240 BUSH, 16 MM THICK EPDM, TO SUIT 240 MM

BC16/250 BUSH, 16 MM THICK EPDM, TO SUIT 250 MM

BC16/315 BUSH, 16 MM THICK EPDM, TO SUIT 315 MM

BC16/346 BUSH, 16 MM THICK EPDM, TO SUIT 346 MM

BC16/400 BUSH, 16 MM THICK EPDM, TO SUIT 400-499MM

BC24/315 BUSH, 24 MM THICK EPDM, TO SUIT 315 MM

BC24/327 BUSH, 24 MM THICK EPDM, TO SUIT 327 MM

BC24/400 BUSH, 24 MM THICK EPDM, TO SUIT 400-499MM

BC32/400 BUSH, 32 MM THICK EPDM, TO SUIT 400-499MM

Note: Larger bushes can be fabricated as per request.

If you require a bush larger than what is listed above, contact us.

• MRWA Approved